The RoboScout we dismantled was Serial Number 4891. We found the Assembly Diagram very helpful. I'll give the page references to it wherever that seems helpful.

If you intend to reassemble the RoboScout, you'll want to keep track of all the electrical connectors that plug into the main board. Fortunately, this was very easy to do. In the unit we dismantled, The board has connector IDs printed on it and the connectors themselves had these IDs written on them in indelible ink. Of course, you can always diagram the board and mark the connectors yourself if these IDs are missing or unreadable.

Sections:

• Remove the Back
• Detach the Power Switch
• Remove Front Panel and PIR Unit
• Remove Main Board
• Remove the Battery
• Remove Chest Panel
• Remove Head and Gearbox Assembly
• Separate Leg Frame
• Remove Right Arm
• Open Right Arm
• Open Right Leg

Warning: If you take apart your RoboScout, you may damage it. Also, you'll almost certainly void your warranty. If you decide to take apart your RoboScout anyways, be aware that you do it at your own risk.

   Next >